- home /
- products /
- exterior walls /
- textured finishes /
- apex duracast /
- apex duracast roughtex
-
![]()
- This service is currently not available in your area. Find an Asian Paints dealer near you for your home makeover project. ok
apex duracast roughtex
benefits
hides cracks
It hides surface undulations and fine surface cracks.
tough textured
The tough textured finish lasts for long and ensures low maintenance.
plaster protection
It increases the life of the plaster by protecting it from wind driven rain.
UV resistance
It has excellent UV resistance and adhesion.
relesases moisture
It releases trapped moisture both from paint surface as well as the substrate.
anti-algal
Resists fungus and algal growth, when applied as a system with the recommended top coat.
available packs
-
![Image]()
25kg polysack
Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
coverage
-
![Image]()
On normal masonry surface by a trowel or spatula to obtain an even coating of ~ 2.5 mm
1 coat 2 - 2.5 sq.ft/kg**
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
how to paint
how to paint exterior wall surfaces of your home
pre-painting steps
plaster
New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
cleaning
Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness, please use Asian Paints SmartCare DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer.
filling for cracks
For filling cracks up to 3mm use Asian Paints SmartCare Crack Seal.
filling for holes & dents
In case of dents and holes, use Asian Paints Wall Putty or a mix of white cement and fine sand in the ratio of 1:3.
Apex Duracast RoughTex should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
faqs
how much area does the product cover?
Apex Duracast Roughtex covers 2 - 2.5 square feet per litre.
can we use a thinner to dilute the paint?
We do not recommend using a thinner since no dilution is required in the paint.
what is the application procedure for this paint?
Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:
1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.
2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).
3) Apply the first coat of Asian Paints Duracast Roughtex with a roller (No dilution required). After application, allow the surface to dry for 12 - 16 hours.
4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.
how long will apex duracast roughtex last?
Apex Duracast Roughtex will last for 7 years.
what are the benefits of applying apex duracast roughtex?
Painters will find the application easier as compared to other textures. Moreover, it hides fine cracks on the wall.
which kind of tool can be used to apply this texture?
You need to use a roller while applying the Asian Paints Apex Duracast Roughtex.
how much area does the product cover?
Apex Duracast Roughtex covers 2 - 2.5 square feet per litre.
can we use a thinner to dilute the paint?
We do not recommend using a thinner since no dilution is required in the paint.
what is the application procedure for this paint?
Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:
1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.
2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).
3) Apply the first coat of Asian Paints Duracast Roughtex with a roller (No dilution required). After application, allow the surface to dry for 12 - 16 hours.
4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.
similar products
apex duracast dholpurtex
apex duracast swirltex
apex duracast finetex
apex duracast pebbletex
apex duracast crosstex
